Safety responsibilities at boundaries

Your organisation should find out and record how the part of the railway that you are responsible for interfaces with passengers, neighbours, the rest of the railway and the work done by other organisations. It is good practice to record the railway system boundaries that describe the limits of your responsibility. These boundaries may be based on particular railway components or by defined geographical boundaries along a line of route. You need to understand this to react properly to safety issues. If you become aware of an issue that falls within your area of responsibility then you should resolve it. If you become aware of an issue that falls within someone else’s area of responsibility then you should bring it to their attention to that they can resolve it.

For example, responsibility for the track system may be divided between a number of maintenance organisations using defined geographical boundaries, whereas the corresponding signalling equipment boundaries may overlap in a more complex component boundary arrangement. Similarly, for rolling stock, the responsibility for maintenance of the traction system on a vehicle may be separate from the responsibility for maintenance of internal fittings on the same vehicle.

It is also good practice to record the limits of your work activities, so that you can understand where your responsibilities begin and end. Where the part of the railway or the work you do has a boundary with another part of the railway or organisation, then you may find that the boundary and the protocols for managing it are clearly defined in interface standards and procedures for the railway.

Where an interface standard is mandatory and the other party has told you that there are no areas where they do not comply, then you are entitled to assume that it will indeed be complied with. However, if there could be any doubt about where safety responsibilities begin and end, the organisations on both sides of the boundary should agree in writing where the boundary is. This agreement is to prevent additional safety risks from arising and to make sure that everything that needs to be maintained is covered. 

This might include sharing information about the type of work that you are both going to do so that you can understand what effect it will have on safety at the boundary.