Boilers can be classified as follows:
1. According to the flow of water and hot
gases – fire tube (or smoke tube) and water tube boilers.
In fire tube boilers, hot gases pass
through tubes which are surrounded with water. Examples: Vertical, Cochran,
Lancashire and Locomotive boilers. There may be single tube as in case of
Lancashire boiler or there may be a bank of tubes as in a locomotive boiler.
In water tube boilers, water circulates
through a large number of tubes and hot gases pass around them. Eg., bobcock &
Wilcox boiler.
2. According to the axis of the shell –
vertical and horizontal boilers.
3. According to location or position of the
furnace. Externally and internally fired boilers.
In internally fired boilers, the furnace
forms an integral part of the boilers structure. The vertical tubular,
locomotive and the scotch marine boilers are well known examples.
Externally fired boilers have a separate
furnace built outside the boiler shell and usually below it. The horizontal
return tube (HRT) boiler is probably the most widely known example of this type.
4. According to the application –
stationery and mobile boilers. A stationary boilers is one of which is
installed permanently on a land installation.
A marine boiler is a mobile boiler meant
for ocean cargo and passenger ships with an inherent fast steaming capacity.
5. According to steam pressure – low,
medium and high pressure boilers.