Superheating

power plant boiler as presently designed doesn’t do a good job of producing ample amounts of superheated steam, the kind of steam that turbines need to spin and power generators.   During the process of superheating the more heat energy that’s added to the steam in our boiler, the higher its temperature becomes.   However, our boiler can only produce a limited amount of superheated steam as it stands now.

      So how do we get more heat energy into the superheated steam?   Take a look at the illustration below for the solution to the problem.

      You’ll note a prominent new addition to our illustration.   It’s called a superheater.

      The superheater performs the function of raising the temperature of the steam produced in our boiler to the incredibly high temperatures required to run steam turbines and electrical generators down the line, as explained in my blog on steam turbines.   The superheater adds more heat energy to the steam than the boiler can alone.

      In fact, the amount of heat energy in the superheated steam produced with our new design is proportional to the amount of electrical energy that power plant generators produce.   Its addition to our setup will result in more energy supplied to the turbine, which in turn spins the generator.   The result is more electricity for consumers to use and a more efficiently operating power plant.