PRESSMAG SP MAGNETIC CLAMPING

Electro-permanent magnetic clamping system provides flexible clamping for molders who are unable to standardize their molds.

PRESSMAG SP: MORE FLEXIBILITY ON SMALLER MACHINES

No mold standardization required with EAS SP clamping systems, as with all EAS magnetic clamping solutions: SP does not require electric power to maintain clamping force.

· Larger clamping forces

· Thinner plates

· Flexible around holes = more clamping force

· Max quantity of mounting bolts = no air gap

· Standard temperature range till 150C.

Smaller poles giving more force

Electropermanent magnetic Pressmag SP systems have a 47 mm (1.85”) square base and feature a pole to pole design – alternating north – south poles. This provides more clamping force towards
the center of the platens on small machines.
47mm poles are easier to place between and around holes than larger poles.
More small poles = more force than with larger poles.

Resin sealing or metal-to-metal surface

Pressmag SP100 is designed for a max temperature of 100ºC (212 ºF) and features square poles with resin sealing.
Pressmag SP150 has laser-cut stainless steel mesh seals and covers the complete system, providing an easy-to-clean, perfectly flat all steel surface.
The Pressmag SP150 is designed for high temperature applications up to 150ºC (302ºF).

No bending of the magnetic plate

To maintain the SP’s plate stiffness, EAS adds screws between the poles and around the center.

PRESSMAGS AND TEMPERATURE

Magnets are affected by temperature. See the difference in service temperatures per Pressmag system below:

Pressmag type	Machine size	Service temperature
SP100	< 400 ton	100°C (212°F)
SP150	< 400 ton	150°C (302°F)
HP100	> 400 ton	100°C (212°F)
HP120	> 400 ton	120°C (248°F)
LP100	> 400 ton	100°C (212°F)