Classification of Pipe Supports

Broadly the pipe supports are classified in three groups as per following details / functions :

· General details

· Construction details

· Functions ie. purpose

CLASSIFICATION AS PER GENERAL DETAILS

A pipe line need to be supported from a foundation or an structure. The piping loads will be acting on thesefoundations / structures. Since these foundations / structures are built on ground, they will exert an equaland opposite reaction, while supporting the pipe. In a pipe support, there will be some parts of support arrangement which is directly attached to the pipeline and there will be some other parts which shall bedirectly attached to the foundation / structure supporting the pipe.

As per this general detail the support is classified as :

PRIMARY SUPPORTS :

It is the parts of support assembly which is directly connected to the pipe.

SECONDARY SUPPORTS :

It is the parts of support assembly which is directly connected to the foundation / structure and is supporting the primary support attached to the pipe line.

CLASSIFICATION AS PER CONSTRUCTION :

Based on construction details, pipe supports are broadly classified in three types, as

- RIGID SUPPORTS

- ELASTIC SUPPORTS

- ADJUSTABLE SUPPORTS

These are described below in brief.

RIGID SUPPORTS :

This type of support arrangement is generally very simple and has maximum use in piping. It does not have adjustability to the erection tolerances. It will directly rest on foundation or structure which is supporting the pipe. Common type of RIGID SUPPORTS are shoe type (welded), shoe type (with clamp) Trunnion type, valve holder type, support brackets (Secondary Support). These are described under the topic 'Supports Generally used'.

ELASTIC SUPPORT :

This type of support is commonly used for supporting hot piping. It shall be able to support pipes evenwhen the pipe is moving up or down at support point.

Common type of elastic supports are variable type spring supports, constant type spring supports. These are described under the topic 'Supports generally used '.

ADJUSTABLE SUPPORTS :

This type of support is Rigid type in construction but is has few nuts and bolts arrangements for adjustingthe supports with respect to the actual erected condition of pipe. The support can be adjusted for theerection tolerances in the piping. These are required for a better supporting needs at critical locationsof pipe supports.

Mostly all type of rigid supports can be modified by using certain type of nuts and bolts arrangement,to make it as an Adjustable support.

Only a typical type of adjustable support is described under the topic 'Supports Generally used.'

CLASSIFICATION AS PER FUNCTION (i.e. PURPOSE)

Pipe supports classified as per functions are summarised in the Table.. These are shown along with itsbasic construction, the symbols generally used and type of restraints it offers to the piping system.

The supports classified as per function are further described as follows :

LOOSE SUPPORT :

This is most commonly used support meant for supporting only the pipe weight vertically. It allows pipe tomove in axial as well as transverse direction but restricts only the vertical downward movement.

LONGITUDINAL GUIDE :

This type of support is used to restrict the movement of pipe in transverse direction i.e. perpendicularto length of pipe but allow movement in longitudinal direction. This is also a commonly used type ofsupport. Generally it is used along with Loose support.

TRANSVERSE GUIDE :

This type of support is used to restrict the movement of pipe in longitudinal (axial ) direction but allows thepipe to move in transverse direction. This is also referred as 'AXIAL STOP'. This type is less used ascompared to above two types. Generally it is used along with Loose support.

FIXED POINT / ANCHOR :

FIX POINT type of support is used to restrict movements in all three directions.  ANCHOR type of supportis used to restirct movement in all three directions and rotation also in these three directions.

Non-Welded Type (FIX POINT) :

This can be considered as a combination of longitudinal and transverse guide. This type resist only thelinear movements in all directions but not the rotational movements. This avoids heavy loading of supportas well as pipe. Therefore this type of support is preferred over welded type.

Welded Type (ANCHOR)

This type of support prevents total movements i.e. linear as well as rotational. This type of support is usedwhen it is absolutely essential to prevent any moment/force being transferred further. It causes heavyloading on support as well as pipe.

LIMIT STOP :

As name itself indicates it allows pipe movement freely upto a certain limit and restricts any furthermovement. This is useful when total stops causes excessive loading on piping and support or nozzle.

This type of support should be used selectively, because of stringent and complicated requirementsof design, erection and operation.

SPECIAL SUPPORTS :

When we need a pipe support whose construction or functional details are different from the available details, then a special support detail sketch is prepared. The functions of this support can be  any combination of above functions.