Production

This illustration gives an overview of typical oil and gas production facilities:

Image result for Oil and gas production facilities

Although there is a wide range of sizes and layouts, most production facilities have many of the same processing systems shown in this simplified overview:

Today, oil and gas is produced in almost every part of the world, from the small 100 barrels-a-day private wells to the large bore 4,000 barrels-a-day wells; in shallow 20 meter deep reservoirs to 3,000 meter deep wells in more than 2,000 meters of water; in $100,000 onshore wells and $10 billion offshore developments. Despite this range, many parts of the process are quite similar in principle.

At the left side, we find the wellheads. They feed into production and test manifolds. In distributed production, this is called the gathering system. The remainder of the diagram is the actual process, often called the gas oil separation plant (GOSP). While there are oil- or gas-only installations, more often the well-stream will consist of a full range of hydrocarbons from gas (methane, butane, propane, etc.), condensates (medium density hydrocarbons) to crude oil. With this well flow, we also get a variety of unwanted components, such as water, carbon dioxide, salts, sulfur and sand. The purpose of the GOSP is to process the well flow into clean, marketable products: oil, natural gas or condensates. Also included are a number of utility systems, which are not part of the actual process but provide energy, water, air or some other utility to the plant.