Motor Duty Class and its Classification

Now a days, in almost every applications, electric motors are used, and to control them electrical drives are employed. But the operating time for all motors are not the same. Some of the motors runs all the time, and some of the motor's run time is shorter than the rest period. Depending on this, concept of motor duty class is introduced and on the basis of this duty cycles of the motor can be divided in eight categories such as

1. Continuous duty

2. Short time duty

3. Intermittent periodic duty

4. Intermittent periodic duty with starting

5. Intermittent periodic duty with starting and braking

6. Continuous duty with intermittent periodic loading

7. Continuous duty with starting and braking

8. Continuous duty with periodic speed changes

Continuous Duty
 This duty denotes that, the motor is running long enough AND the electric motor temperature reaches the steady state value. These motors are used in paper mill drives, compressors, conveyors etc.

Short Time Duty
In these motors, the time of operation is very low and the heating time is much lower than the cooling time. So, the motor cooks off to ambient temperature before operating again. These motors are used in crane drives, drives for house hold appliances, valve drives etc.

Intermittent Periodic Duty
Here the motor operates for some time and then there is rest period. In both cases, the time is insufficient to raise the temperature to steady state value or cool it off to ambient temperature. This is seen at press and drilling machine drives.


Intermittent Period Duty with Starting
In this type of duty, there is a period of starting, which cannot be ignored and there is a heat loss at that time. After that there is running period and rest period which are not adequate to attain the steady state temperatures. This motor duty class is widely used in metal cutting and drilling tool drives, mine hoist etc.

Intermittent Periodic Duty with Starting and Braking
In this type of drives, heat loss during starting and braking cannot be ignored. So, the corresponding periods are starting period, operating period, braking period and resting period, but all the periods are too short to attain the respective steady state temperatures, these techniques are used in billet mill drive, manipulator drive, mine hoist etc.

Continuous Duty with Intermittent Periodic Loading
In this type of motor duty, everything is same as the periodic duty but here a no load running period occurs instead of the rest period. Pressing, cutting are the examples of this system.
Continuous Duty with Starting and Braking
It is also a period of starting, running and braking and there is no resting period. The main drive of a blooming mill is an example.
Continuous Duty with Periodic Speed Changes
In this type of motor duty, there are different running periods at different loads and speeds. But there is no rest period and all the periods are too short to attain the steady state temperatures.