Lifting
heavy objects into position always presents a challenge, whether it’s a mom
lifting a toddler to her hip or a construction worker lifting work materials
to great heights. During my career as an engineer I’ve dealt
with similar challenges, some of which were handled quite nicely by
incorporating a simple pulley, which
we introduced last time, into my design. But sometimes, due
to certain restrictions, the addition of a simple pulley into the works isn’t
enough to get the job done. We’ll take a look at one of the
restrictions working against the use of a simple pulley today. The
simple pulley is believed to have first been used by the Greeks as far back
as the 9thCentury BC. Back then it would have
come in handy to lift cargo aboard ships, hoist sails on masts, and lift
building materials high off the ground to supply workmen during the
construction of temples and other marvels of ancient
architecture. In other words, pulleys literally saved
ancient workers thousands of steps when it came to lifting things off the
ground. Let’s
return to ancient times for a moment to get an understanding of the mechanics behind the workings of the simple pulley as put
to use in a basic lifting application.
The Simple Pulley Gives Us a Lift With
a simple pulley, the tension force F1 applied to the rope by
the pull-er is equal to the tension force F2 exerted
upon the object, the pull-ee. Once
lifted off the ground, these forces are also equal to the object’s weight, W,
which gravity works upon to
return the lifted object to its previous position on the
ground. All these forces come to bear upon whatever’s doing the
pulling. If
this pull-er happens to be a human, then the
simple pulley’s effectiveness to lift things is directly proportionate to
that human’s strength. In the case of the toga’d figure above, that would be about 10
pounds. It’s this caveat that limits the usefulness of the
simple pulley when relying on human power alone, particularly when it’s
employed to lift extremely heavy objects like marble
pillars. A single human isn’t up to the task. |