What is hogging stress

Hogging stress

The length of the vessel may be considered to act like a long girder pivoted on a wave about its centre. In this position the fore and after ends of the vessel will bend downwards, causing compression forces in the keel area and tension forces at the upper deck level.

The condition is brought about by increased buoyancy forces being created at and around the midships point of the vessel. Increased gravitational force, due to the metal structure of the vessel acting vertically downward, occurs at the extremities of the ship.When both forces exist at the same time, e.g. as the vessel is pivoted by a wave midships, a ‘hogging’ condition is present.

This can be accentuated in a vessel of an all-aft design, where the additional weight of the machinery space would produce high loading in the aft part of the vessel.The condition may also be unnecessarily increased by ‘bad’ cargo loading in the fore and after parts of the vessel, leaving the midships area comparatively lightly loaded.