Dimensionless Numbers and Their Importance in Fluid Mechanics
In fluid mechanics, Dimensionless numbers or non-dimensional numbers are those which are useful to determine the flow characteristics of a fluid. Inertia force always exists if there is any mass in motion. Dividing this inertia force with other forces like viscous force, gravity force, surface tension, elastic force, or pressure force, gives us the dimensionless numbers.
Dimensionless Numbers in Fluid Mechanics
Some important dimensionless numbers used in fluid mechanics and their importance is explained below.
1. Reynolds number
Reynolds number is the ratio of inertia force to the viscous force. It describes the predominance of inertia forces to the viscous forces occurring in the flow systems.
Where,
µ = viscosity of fluid (kg/m.s)
d = diameter of pipe (m)
v = velocity of flow (m/s)
Importance
Reynolds number is applicable for closed surface flows as well as for free surface flows. Some applications where Reynolds number is significant for finding the flow behavior are incompressible flow through small pipes, the motion of a submarine completely under water, flow through low-speed turbomachines, etc.
2. Froude number
Froude number is the ratio of inertia force to the gravitational force. Froude number is significant in case of free surface flows where the gravitational force is predominant compared to other forces.
Where,
L = length of flow (m)
v = velocity of flow (m/s)
g = acceleration due to gravity (m/s2)
Importance
Froude number is useful to describe the flow in open channels, flow over notches and weirs, the motion of a ship in turbulent sea conditions (ship resistance), flow over spillways, etc.
3. Weber number
Weber number is the ratio of inertia force to the surface tension. The formation of droplets or water bubbles in a fluid is normally due to surface tension. If Weber number is small, surface tension is larger and vice versa.
Where,
d = diameter of water droplet (m)
v = velocity of flow (m/s)
Applications
Weber number is less than 1 when surface tension is predominant. It happens when the curvature of the liquid surface is small compared to its depth. This can be seen in different situations such as the flow of blood in veins and arteries, atomization of liquids, capillary flow of water in soils, thin layers of fluid passing over surface, etc.
4. Mach number
Mach number is the ratio of inertia force to the elastic force. If the Mach number is one, then the flow velocity is equal to the velocity of sound in the fluid. If it is less than one, then the flow is called subsonic flow, and if it is greater than one the flow is called supersonic flow.
Where,
v = Velocity of flow (m/s)
c = Velocity of sound in fluid (m/s)
5. Euler’s number
Euler number is the ratio of pressure force to the inertia force.
Where,
F = pressure force
L = Characteristic length of flow (m)
v = velocity of flow (m/s)