"Phase Diagrams",
        "Equilibrium Phase Diagrams",
        "Binary diagrams",
        "Eutectic system",
        "Intermediate phases",
        "Particle strengthening by precipitation & precipitation reactions",
        "Kinetics of nucleation and growth",
        "The iron – carbon system, phase transformations",
        "Transformation rate effects and TTT diagrams, Microstructure and Property Changes in Fe-C Alloys",
        "MANUFACTURING ENGINEERING",
        "Manufacturing Process",
        "Metal Forming Processes",
        "Surface Finishing Processes",
        "Processes Effecting Change in Properties",
        "Inspection And Quality Control",
        "Mechanization And Automation",
        "COMPUTER AIDED MANUFACTURING (CAM)",
        "Classification Of Engineering Materials",
        "Furnaces For Melting Different Materials",
        "Blast Furnace",
        "CUPOLA FURNACE",
        "Precautions for Safety of Cupola Furnace",
        "OPEN HEARTH FURNACE",
        "AIR FURNACE",
        "PATTERN",
        "Common Pattern Materials",
        "Metal Pattern",
        "Plastic Patterns",
        "Plaster & Wax patterns",
        "Factors Effecting Selection Of Pattern Material",
        "Types Of Pattern",
        "Pattern Allowances",
        "Core And Core Box",
        "Core Box",
        "Design Considerations In Pattern Making",
        "Hand Tools Used In Foundry Shop",
        "FLASKS",
        "MOLDING SAND",
        "Kinds Of Moulding Sand",
        "Properties Of Moulding Sand",
        "Steps Involved In Making A Sand Mold",
        "VENTING OF MOLDS",
        "GATING SYSTEM IN MOLD",
        "Factors Controling Gating Design",
        "Role Of Riser In Sand Casting",
        "Green Sand Molding",
        "CORE",
        "CORE SAND",
        "MOLDING METHODS",
        "Carbon-Dioxide Gas Molding",
        "Shell Molding",
        "Plaster Molding",
        "SLUSH CASTING",
        "PRESSURE DIE CASTING",
        "Advantages Of Die Casting Over Sand Casting",
        "Comparison Between Permanent Mold Casting And Die Casting",
        "SHELL MOLD CASTING",
        "IRON-CARBON EQUILIBRIUM DIAGRAM",
        "Significance of Transformations Lines",
        "Objectives of Heat Treatment",
        "METAL FORMING",
        "RECRYSTALISATION",
        "HOT WORKING",
        "Classification Of Hot Working Processes",
        "Hot Piercing or Seamless tubing",
        "Hot Extrusion",
        "Hot Drawing",
        "Hot Spinning",
        "Cold Working",
        "Characteristics Of Cold Working",
        "Advantages & Disadvantages Of Cold Working",
        "COLD-ROLLING",
        "COLD EXTRUSION",
        "WIRE DRAWING",
        "Sheet Metal Processes",
        "Cold Drawing",
        "Metal Flow in Deep Drawing",
        "Embossing",
        "Coining",
        "Roll Forming & Shot Peening",
        "METAL CUTTING",
        "CUTTING TOOL",
        "Nomenclature Single Point Tool",
        "Tool Signature",
        "Mechanics Of Metal Cutting",
        "Types Of Chips",
        "Coolants Or Cutting Fluids Or Emulsions",
        "Non-Traditional Or Unconventional Machining Processes",
        "LATHE MACHINE",
        "Construction Of Lathe Machine",
        "Accessories And Attachments Of Lathe",
        "Lathe Operations",
        "Tapers And Taper Turning",
        "THREAD CUTTING",
        "Drilling On A Lathe",
        "Cutting Speed & Feed"

















stringArrayList.add("Phase Diagrams");

stringArrayList.add("Equilibrium Phase Diagrams");

stringArrayList.add("Binary diagrams");

stringArrayList.add("Eutectic system");

stringArrayList.add("Intermediate phases");

stringArrayList.add("Particle strengthening by precipitation & precipitation reactions");

stringArrayList.add("Kinetics of nucleation and growth");

stringArrayList.add("The iron – carbon system, phase transformations");

stringArrayList.add("Transformation rate effects and TTT diagrams, Microstructure and Property Changes in Fe-C Alloys");

stringArrayList.add("MANUFACTURING ENGINEERING");

stringArrayList.add("Manufacturing Process");

stringArrayList.add("Metal Forming Processes");

stringArrayList.add("Surface Finishing Processes");

stringArrayList.add("Processes Effecting Change in Properties");

stringArrayList.add("Inspection And Quality Control");

stringArrayList.add("Mechanization And Automation");

stringArrayList.add("COMPUTER AIDED MANUFACTURING (CAM)");

stringArrayList.add("Classification Of Engineering Materials");

stringArrayList.add("Furnaces For Melting Different Materials");

stringArrayList.add("Blast Furnace");

stringArrayList.add("CUPOLA FURNACE");

stringArrayList.add("Precautions for Safety of Cupola Furnace");

stringArrayList.add("OPEN HEARTH FURNACE");

stringArrayList.add("AIR FURNACE");

stringArrayList.add("PATTERN");

stringArrayList.add("Common Pattern Materials");

stringArrayList.add("Metal Pattern");

stringArrayList.add("Plastic Patterns");

stringArrayList.add("Plaster & Wax patterns");

stringArrayList.add("Factors Effecting Selection Of Pattern Material");

stringArrayList.add("Types Of Pattern");

stringArrayList.add("Pattern Allowances");

stringArrayList.add("Core And Core Box");

stringArrayList.add("Core Box");

stringArrayList.add("Design Considerations In Pattern Making");

stringArrayList.add("Hand Tools Used In Foundry Shop");

stringArrayList.add("FLASKS");

stringArrayList.add("MOLDING SAND");

stringArrayList.add("Kinds Of Moulding Sand");

stringArrayList.add("Properties Of Moulding Sand");

stringArrayList.add("Steps Involved In Making A Sand Mold");

stringArrayList.add("VENTING OF MOLDS");

stringArrayList.add("GATING SYSTEM IN MOLD");

stringArrayList.add("Factors Controling Gating Design");

stringArrayList.add("Role Of Riser In Sand Casting");

stringArrayList.add("Green Sand Molding");

stringArrayList.add("CORE");

stringArrayList.add("CORE SAND");

stringArrayList.add("MOLDING METHODS");

stringArrayList.add("Carbon-Dioxide Gas Molding");

stringArrayList.add("Shell Molding");

stringArrayList.add("Plaster Molding");

stringArrayList.add("SLUSH CASTING");

stringArrayList.add("PRESSURE DIE CASTING");

stringArrayList.add("Advantages Of Die Casting Over Sand Casting");

stringArrayList.add("Comparison Between Permanent Mold Casting And Die Casting");

stringArrayList.add("SHELL MOLD CASTING");

stringArrayList.add("IRON-CARBON EQUILIBRIUM DIAGRAM");

stringArrayList.add("Significance of Transformations Lines");

stringArrayList.add("Objectives of Heat Treatment");

stringArrayList.add("METAL FORMING");

stringArrayList.add("RECRYSTALISATION");

stringArrayList.add("HOT WORKING");

stringArrayList.add("Classification Of Hot Working Processes");

stringArrayList.add("Hot Piercing or Seamless tubing");

stringArrayList.add("Hot Extrusion");

stringArrayList.add("Hot Drawing");

stringArrayList.add("Hot Spinning");

stringArrayList.add("Cold Working");

stringArrayList.add("Characteristics Of Cold Working");

stringArrayList.add("Advantages & Disadvantages Of Cold Working");

stringArrayList.add("COLD-ROLLING");

stringArrayList.add("COLD EXTRUSION");

stringArrayList.add("WIRE DRAWING");

stringArrayList.add("Sheet Metal Processes");

stringArrayList.add("Cold Drawing");

stringArrayList.add("Metal Flow in Deep Drawing");

stringArrayList.add("Embossing");

stringArrayList.add("Coining");

stringArrayList.add("Roll Forming & Shot Peening");

stringArrayList.add("METAL CUTTING");

stringArrayList.add("CUTTING TOOL");

stringArrayList.add("Nomenclature Single Point Tool");

stringArrayList.add("Tool Signature");

stringArrayList.add("Mechanics Of Metal Cutting");

stringArrayList.add("Types Of Chips");

stringArrayList.add("Coolants Or Cutting Fluids Or Emulsions");

stringArrayList.add("Non-Traditional Or Unconventional Machining Processes");

stringArrayList.add("LATHE MACHINE");

stringArrayList.add("Construction Of Lathe Machine");

stringArrayList.add("Accessories And Attachments Of Lathe");

stringArrayList.add("Lathe Operations");

stringArrayList.add("Tapers And Taper Turning");

stringArrayList.add("THREAD CUTTING");

stringArrayList.add("Drilling On A Lathe");

stringArrayList.add("Cutting Speed & Feed");
















if (selected.equals("Phase Diagrams")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/1.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Equilibrium Phase Diagrams")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/2.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Binary diagrams")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/3.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Eutectic system")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/4.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Intermediate phases")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/5.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Particle strengthening by precipitation & precipitation reactions")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/6.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Kinetics of nucleation and growth")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/7.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("The iron – carbon system, phase transformations")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/8.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Transformation rate effects and TTT diagrams, Microstructure and Property Changes in Fe-C Alloys")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/9.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("MANUFACTURING ENGINEERING")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/10.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Manufacturing Process")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/11.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Metal Forming Processes")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/12.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Surface Finishing Processes")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/13.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Processes Effecting Change in Properties")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/14.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Inspection And Quality Control")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/15.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Mechanization And Automation")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/16.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("COMPUTER AIDED MANUFACTURING (CAM)")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/17.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Classification Of Engineering Materials")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/18.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Furnaces For Melting Different Materials")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/19.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Blast Furnace")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/20.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("CUPOLA FURNACE")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/21.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Precautions for Safety of Cupola Furnace")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/22.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("OPEN HEARTH FURNACE")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/23.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("AIR FURNACE")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/24.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("PATTERN")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/25.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Common Pattern Materials")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/26.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Metal Pattern")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/27.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Plastic Patterns")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/28.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Plaster & Wax patterns")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/29.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Factors Effecting Selection Of Pattern Material")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/30.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Types Of Pattern")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/31.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Pattern Allowances")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/32.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Core And Core Box")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/33.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Core Box")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/34.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Design Considerations In Pattern Making")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/35.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Hand Tools Used In Foundry Shop")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/36.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("FLASKS")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/37.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("MOLDING SAND")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/38.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Kinds Of Moulding Sand")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/39.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Properties Of Moulding Sand")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/40.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Steps Involved In Making A Sand Mold")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/41.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("VENTING OF MOLDS")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/42.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("GATING SYSTEM IN MOLD")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/43.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Factors Controling Gating Design")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/44.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Role Of Riser In Sand Casting")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/45.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Green Sand Molding")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/46.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("CORE")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/47.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("CORE SAND")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/48.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("MOLDING METHODS")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/49.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Carbon-Dioxide Gas Molding")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/50.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Shell Molding")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/51.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Plaster Molding")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/52.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("SLUSH CASTING")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/53.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("PRESSURE DIE CASTING")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/54.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Advantages Of Die Casting Over Sand Casting")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/55.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Comparison Between Permanent Mold Casting And Die Casting")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/56.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("SHELL MOLD CASTING")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/57.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("IRON-CARBON EQUILIBRIUM DIAGRAM")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/58.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Significance of Transformations Lines")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/59.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Objectives of Heat Treatment")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/60.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("METAL FORMING")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/61.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("RECRYSTALISATION")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/62.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("HOT WORKING")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/63.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Classification Of Hot Working Processes")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/64.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Hot Piercing or Seamless tubing")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/65.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Hot Extrusion")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/66.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Hot Drawing")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/67.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Hot Spinning")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/68.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Cold Working")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/69.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Characteristics Of Cold Working")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/70.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Advantages & Disadvantages Of Cold Working")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/71.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("COLD-ROLLING")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/72.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("COLD EXTRUSION")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/73.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("WIRE DRAWING")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/74.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Sheet Metal Processes")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/75.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Cold Drawing")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/76.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Metal Flow in Deep Drawing")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/77.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Embossing")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/78.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Coining")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/79.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Roll Forming & Shot Peening")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/80.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("METAL CUTTING")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/81.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("CUTTING TOOL")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/82.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Nomenclature Single Point Tool")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/83.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Tool Signature")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/84.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Mechanics Of Metal Cutting")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/85.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Types Of Chips")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/86.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Coolants Or Cutting Fluids Or Emulsions")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/87.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Non-Traditional Or Unconventional Machining Processes")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/88.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("LATHE MACHINE")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/89.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Construction Of Lathe Machine")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/90.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Accessories And Attachments Of Lathe")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/91.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Lathe Operations")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/92.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Tapers And Taper Turning")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/93.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("THREAD CUTTING")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/94.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Drilling On A Lathe")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/95.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }

if (selected.equals("Cutting Speed & Feed")) { Intent i = new Intent(MainActivity.this, DetailActivity.class); i.putExtra("id", position); i.putExtra("url" , "file:///android_asset/96.htm" ); i.putExtra( "value", adapter.getItem(position)); startActivity(i); }