Previously in Lesson 3, the behavior of
waves traveling along a rope from a more dense medium
to a less dense medium (and vice versa) was discussed. The wave doesn't just stop when it reaches the end of the medium.
Rather, a wave will undergo certain behaviors when it encounters the end of the medium.
Specifically, there will be some reflection off the boundary and some
transmission into the new medium. But what if the wave is traveling in a
two-dimensional medium such as a water wave traveling through ocean water? Or
what if the wave is traveling in a three-dimensional medium such as a sound
wave or a light wave traveling through air? What types of behaviors can
be expected of such two- and three-dimensional waves?
The study of waves in two dimensions is often done using a ripple tank.
A ripple tank is a large glass-bottomed tank of water that is used to study
the behavior of water waves. A light typically shines upon the water from above
and illuminates a white sheet of paper placed directly below the tank. A portion
of light is absorbed by the water as it passes through the tank. A crest of
water will absorb more light than a trough. So the bright spots represent wave
troughs and the dark spots represent wave crests. As the water waves move
through the ripple tank, the dark and bright spots move as well. As the waves
encounter obstacles in their path, their behavior can be observed by watching the movement
of the dark and bright spots on the sheet of paper. Ripple tank demonstrations
are commonly done in a Physics class in order to discuss the principles
underlying the reflection, refraction, and diffraction of waves.
If a linear object attached to an oscillator bobs back and
forth within the water, it becomes a source of straight waves. These straight waves
have alternating crests and troughs. As viewed on the sheet of paper below the
tank, the crests are the dark lines stretching across the paper and the troughs
are the bright lines. These waves will travel through the water until they encounter an
obstacle - such as the wall of the tank or an object placed within the water.
The diagram at the right depicts a series of straight waves approaching a long
barrier extending at an angle across the tank of water. The direction that
these wavefronts (straight-line crests) are traveling through the water is
represented by the blue arrow. The blue arrow is called a ray and is
drawn perpendicular to the wavefronts. Upon reaching the barrier placed within the
water, these waves bounce off the water and head in a different direction. The
diagram below shows the reflected wavefronts and the reflected ray. Regardless of the
angle at which the wavefronts approach the barrier, one general law of reflection holds true:
the waves will always reflect in such a way that the angle at which they
approach the barrier equals the angle at which they reflect off the barrier.
This is known as the law of reflection. This law will be discussed
in more detail in Unit 13 of The Physics Classroom.
The discussion above pertains to the reflection of waves off of straight
surfaces. But what if the surface is curved, perhaps in the shape of a
parabola? What generalizations can be made for the reflection of water waves
off parabolic surfaces? Suppose that a rubber tube having the shape of a
parabola is placed within the water. The diagram at the right depicts such a
parabolic barrier in the ripple tank. Several wavefronts are approaching the barrier; the ray is
drawn for these wavefronts. Upon reflection off the parabolic barrier, the water waves will change
direction and head towards a point. This is depicted in the diagram below. It
is as though all the energy being carried by the water waves is converged at a
single point - the point is known as the focal point. After passing through the
focal point, the waves spread out through the water. Reflection of waves off of
curved surfaces will be discussed in more detail in Unit 13 of The Physics
Classroom.
Reflection involves a change in direction of waves when they
bounce off a barrier. Refraction of waves involves a change in the direction of
waves as they pass from one medium to another. Refraction, or the bending of
the path of the waves, is accompanied by a change in speed and wavelength of
the waves. In Lesson 2, it was mentioned that the speed of a wave is
dependent upon the properties of the medium through which the waves travel. So
if the medium (and its properties) is changed, the speed of the waves is
changed. The most significant property of water that would affect the speed of
waves traveling on its surface is the depth of the water. Water waves travel
fastest when the medium is the deepest. Thus, if water waves are passing from
deep water into shallow water, they will slow down. And as mentioned in the previous
section of Lesson 3, this decrease in speed will also be
accompanied by a decrease in wavelength. So as water waves are transmitted from
deep water into shallow water, the speed decreases, the wavelength decreases, and the direction changes.
This boundary behavior of water waves can be observed in a
ripple tank if the tank is partitioned into a deep and a shallow section. If a
pane of glass is placed in the bottom of the tank, one part of the tank will be
deep and the other part of the tank will be shallow. Waves traveling from the
deep end to the shallow end can be seen to refract (i.e., bend), decrease
wavelength (the wavefronts get closer together), and slow down (they take a longer time to
travel the same distance). When traveling from deep water to shallow water, the
waves are seen to bend in such a manner that they seem to be traveling more
perpendicular to the surface. If traveling from shallow water to deep water,
the waves bend in the opposite direction. The refraction of light waves will be
discussed in more detail in a later unit of The Physics Classroom.
Reflection involves a change in direction of waves when they
bounce off a barrier; refraction of wavesinvolves a
change in the direction of waves as they pass from one medium to another; and diffraction involves a
change in direction of waves as they pass through an opening or around a
barrier in their path. Water waves have the ability to travel around corners,
around obstacles and through openings. This ability is most obvious for water
waves with longer wavelengths. Diffraction can be demonstrated by placing small
barriers and obstacles in a ripple tank and observing the path of the water
waves as they encounter the obstacles. The waves are seen to pass around the
barrier into the regions behind it; subsequently the water behind the barrier
is disturbed. The amount of diffraction (the sharpness of the bending)
increases with increasing wavelength and decreases with decreasing wavelength.
In fact, when the wavelength of the waves is smaller than the obstacle, no
noticeable diffraction occurs.
Diffraction of water waves is observed in a harbor as
waves bend around small boats and are found to disturb the water behind them.
The same waves however are unable to diffract around larger boats since their
wavelength is smaller than the boat. Diffraction of sound waves is commonly
observed; we notice sound diffracting around corners, allowing us to hear others
who are speaking to us from adjacent rooms. Many forest-dwelling birds take
advantage of the diffractive ability of long-wavelength sound waves. Owls for
instance are able to communicate across long distances due to the fact that
their long-wavelength hoots are able to diffract around forest
trees and carry farther than the short-wavelength tweets of songbirds. Diffraction is observed
of light waves but only when the waves encounter obstacles with extremely small
wavelengths (such as particles suspended in our atmosphere). Diffraction of sound wavesand of light waves will be discussed in a later unit of The Physics
Classroom Tutorial.
Reflection, refraction and diffraction are all boundary behaviors of waves associated with the bending of the path of a wave. The bending of the path is an observable behavior when the medium is a two- or three-dimensional medium. Reflection occurs when there is a bouncing off of a barrier. Reflection of waves off straight barriers follows the law of reflection. Reflection of waves off parabolic barriers results in the convergence of the waves at a focal point. Refraction is the change in direction of waves that occurs when waves travel from one medium to another. Refraction is always accompanied by a wavelength and speed change. Diffraction is the bending of waves around obstacles and openings. The amount of diffraction increases with increasing wavelength.