Fluid Mechanics/Hydraulics in Civil Engineering
The widespread applications of fluid mechanics and hydraulics in civil engineering include transportation of fluids in pipes and in open channels, as well as flow measurement for both pipes and open channels. These areas of application use a variety of calculations for design and for analysis.
Liquids and gases are transported through pipes for a wide variety of applications. Engineers need to be able to calculate i) the pipe size needed for a given flow rate and available pump head, ii) the head loss due to a given flow rate through a pipe of known size, or iii) the the flow rate through a specified pipe with a given head loss. These articles present the calculation procedure and the equations to be used for each of these types of calculations, as well as example calculations. There are articles on the use of Darcy-Wiesbach/friction factor calculations and on the use of the Hazen Williams formula. Information is also presented on the use of Excel spreadsheets for pipe flow calculations.
For open channel flow, a free liquid surface is open to atmospheric pressure, so the driving force for flow is gravity, rather than a pressure difference as in pipe flow. Examples of open channel flow include flow in rivers and streams, in storm sewers, in arroyos and irrigation channels, and in man-made open channels such as those used in wastewater treatment plants. Uniform open channel flow occurs when a constant flow rate passes through a channel with constant bottom slope, constant surface roughness, and constant shape and size. These articles center on the use of the Manning equation for uniform open channel flow, including calculation of the hydraulic radius, determination of the flow rate in a given channel at a given depth of flow and determination of the normal depth of flow, for a given channel and flow rate. There are articles on natural channel calculations and articles that emphasize calculations for man-made channels.
Weirs and flumes are the most common devices for measuring flow rate in open channels. These articles include information about sharp crested, rectangular and V-notch weirs, broad crested weirs, and Parshall flumes. The information includes descriptive material, diagrams, equations, example calculations, and discussion of the use of Excel spreadsheets for the calculations.
A widely used type of flow measurement device for pipe flow is the differential flow meter, including flow nozzle, orifice, and venturi meters. These meters use a constriction in the flow area to increase the fluid velocity and thus decrease the fluid pressure. The amount of pressure decrease can then be measured and used to calculate the flow rate. Descriptive material, equations, and example calculations are included for flow nozzle, orifice, as well as venturi meters, along with information about pitot tubes, rotameters, and magnetic flow meters.
Hydraulic Jumps and Supercritical Open Channel Flow
Hydraulic jumps occur in order to make a transition from supercritical flow to subcritical flow on a channel that isn't steep enough to maintain supercritical flow. The articles in this section provide background information about subcritical, critical, and supercritical flow, about hydraulic jump calculations, and about calculation of parameters like critical depth and critical slope for open channel flow.
Fundamental fluid mechanic principles are useful in a variety of ways. For example, the Ideal Gas Law can be used to calculate the density of air and other gases at different tempertures and pressures. The equations and methods of calculating drag force due to fluid flow past an immersed object can provide insight into the reason why the dimples in golf balls make the golf balls go farther than smooth balls would.