Brick and tile, structural clay products, manufactured as standard units, used in building construction.
The brick, first produced in a sun-dried form at least 6,000 years ago and the forerunner of a wide range of structural clay products used today, is a small building unit in the form of a rectangular block, formed from clay or shale or mixtures and burned (fired) in a kiln, or oven, to produce strength, hardness, and heat resistance. The original concept of ancient brickmakers was that the unit should not be larger than what one man could easily handle; today, brick size varies from country to country, and every nation’s brickmaking industry produces a range of sizes that may run into the hundreds. The majority of bricks for most construction purposes have dimensions of approximately 5.5 × 9.5 × 20 centimetres (21/4 × 33/4 × 8 inches).
Structural clay tile, also called terra-cotta, is a larger building unit, containing many hollow spaces (cells), and is used mainly as backup for brick facing or for plastered partitions.
Structural clay-facing tile is often glazed for use as an exposed finish. Wall and floor tile is a thin material of fireclay with a natural or glazed finish. Quarry tile is a dense pressed fireclay product for floors, patios, and industrial installations in which great resistance to abrasion or acids is required.
Fireclay brick is used in incinerators, boilers, industrial and home furnaces, and fireplaces. Sewer pipe is fired and glazed for use in sewage-disposal systems, industrial waste systems, and general drainage. Drain tile is porous, round, and sometimes perforated and is used mainly for agricultural drainage. Roofing tile is made in the form of half-round (Spanish tile) and various flat tiles made to resemble slate or cedar shakes; it is used extensively in the Mediterranean countries.
There are also many products made from cement and aggregates that substitute for, and generally perform the same functions as, the structural clay products listed above. These nonclay brick and tile products are described briefly at the end of the article. The main subject of this article, however, is the brick and tile produced from fireclay.
Fireclay brick and tile are two of the most important products within the field of industrial ceramics. For background information on the nature of ceramic materials, see the articles presented in Industrial Ceramics: Outline of Coverage, particularly the articles on traditional ceramics.
Outline of Coverage
History Of Brickmaking
Mud brick, dried in the sun, was one of the first building materials. It is conceivable that on the Nile, Euphrates, or Tigris rivers, following floods, the deposited mud or silt cracked and formed cakes that could be shaped into crude building units to build huts for protection from the weather. In the ancient city of Ur, in Mesopotamia (modern Iraq), the first true arch of sun-baked brick was made about 4000 BC. The arch itself has not survived, but a description of it includes the first known reference to mortars other than mud. A bitumen slime was used to bind the bricks together.
Comalcalco, Mexico: Mayan brick pyramid
Burned brick, no doubt, had already been produced simply by containing a fire with mud bricks. In Ur the potters discovered the principle of the closed kiln, in which heat could be controlled. The ziggurat at Ur is an example of early monumental brickwork perhaps built of sun-dried brick; the steps were replaced after 2,500 years (about 1500 BC) by burned brick.
As civilization spread eastward and westward from the Middle East, so did the manufacture and use of brick. The Great Wall of China (210 BC) was built of both burned and sun-dried bricks. Early examples of brickwork in Rome were the reconstruction of the Pantheon (AD 123) with an unprecedented brick and concrete dome, 43 metres (142 feet) in diameter and height, and the Baths of Hadrian, where pillars of terra-cotta were used to support floors heated by roaring fires.
Enameling, or glazing, of brick and tile was known to the Babylonians and Assyrians as early as 600 BC, again stemming from the potter’s art. The great mosques of Jerusalem (Dome of the Rock), Isfahan (in Iran), and Tehrān are excellent examples of glazed tile used as mosaics. Some of the blues found in these glazes cannot be reproduced by present manufacturing processes.
Western Europe probably exploited brick as a building and architectural unit more than any other area in the world. It was particularly important in combating the disastrous fires that chronically affected medieval cities. After the Great Fire of 1666, London changed from being a city of wood and became one of brick, solely to gain protection from fire.
Bricks and brick construction were taken to the New World by the earliest European settlers. The Coptic descendants of the ancient Egyptians on the upper Nile River called their technique of making mud brick tōbe. The Arabs transmitted the name to the Spaniards, who, in turn, brought the art of adobe brickmaking to the southern portion of North America. In the north the Dutch West India Company built the first brick building on Manhattan Island in 1633.