Measurement of Vertical Angle

Horizontal sight is taken as zero vertical angle. Angle of elevations are noted as +ve angles and angle of depression as –ve angles.

To measure vertical angle the following procedure may be followed:

1. Complete all temporary adjustment at the required station.

2. Take up levelling of the instrument with respect to altitude level provided on the A – frame.

This levelling process is similar to that used for levelling dumpy level i.e., first altitude level is kept parallel to any two levelling screws and operating those two screws bubble is brought to centre. Then by rotating telescope, level tube is brought at right angles to the original position and is levelled with the third screw. The procedure is repeated till bubble is centred in both positions.

3. Then loosen the vertical circle clamp, bisect P and lock the clamp. Read verniers C and D to get vertical angle. Take the average as the actual vertical angle