Joints of Stone Masonry
When start making a stone masonry then comes some joints in stone masonry like a butt joint, Lapped or rebated joint, Table joint, Tongued and grooved joint, Rusticated joints, Slate joints, Saddle joint, Dewel Joints, Cramped joint, Plugged Joints.
· Butt joint
· Lapped or rebated joint
· Table joint
· Tongued and grooved joint
· Rusticated joints
· Slate joints
· Saddle joint
· Dewel Joints
· Cramped joint
· Plugged Joints
In butt joint, two stones are placed adjacent to each other stone over the other is not allowed. This is used for arch work, coping on gables, stones laid on slopes, etc.
Lapped or Rebated joint
In this type of joint, the movement of one stone over the other does not allow. This use for arch work, coping on gables, stones laid on slopes, etc.
In a table joint, a joggle makes in the bed of the stone to check the lateral movement. In case, the lateral pressure is very high this type of joint is more suitable.
In this type of joints, a projection of one stone fits in the corresponding groove of the stone of the adjacent. This type of joint also prevents the sliding of stones.
In Rusticated joint, the edges of the joint sunk below the plane of face work. The different types of rusticate joints can channel joint, vee joins and the vee and channeled joint.
Rusticated Joint
In slate joint, a piece of slate or metal place in between the corresponding groove of adjacent stone.
Slate joint
In this type of joint the stone if rounded off to protect the joints of cornices and similar surface from rainwater. The rainwater moving on the surface in divested away from the joints.
In this joint dowels of slate, gunmetal, brass, bronze, etc. are introduced to connect the two pieces of stone. The dowel inserted into holes drilled in each stone piece and secured in position with cement.
A cramp is a piece of metal with ends turn down. A dovetail groove makes in two pieces of stone and the cramped place in position. Later the rest of the groove grout with lead or cement mortar.
In this type of joint, a depression makes below the top surface dovetailed in the plan. Molten lead or rich cement mortar pour in the dovetail.