METHODS OF IRRIGATION

The four methods of irrigation are:

1. Surface

2. Sprinkler

3. Drip/trickle

4. Subsurface

Surface

Surface irrigation consists of a broad class of irrigation methods in which water is distributed over the soil surface by gravity flow. The irrigation water is introduced into level or graded furrows or basins, using siphons, gated pipe, or turnout structures, and is allowed to advance across the field. Surface irrigation is best suited to flat land slopes, and medium to fine textured soil types which promote the lateral spread of water down the furrow row or across the basin.

Surface irrigation

Sprinkler

Sprinkler irrigation is a method of irrigation in which water is sprayed, or sprinkled through the air in rain like drops. The spray and sprinkling devices can be permanently set in place (solid set), temporarily set and then moved after a given amount of water has been applied (portable set or intermittent mechanical move), or they can be mounted on booms and pipelines that continuously travel across the land surface (wheel roll, linear move, center pivot).

Sprinkler irrigation

Drip/trickle

Drip/trickle irrigation systems are methods of microirrigation wherein water is applied through emitters to the soil surface as drops or small streams. The discharge rate of the emitters is low so this irrigation method can be used on all soil types.

Drip/trickle irrigation

Subsurface

Subsurface irrigation consists of methods whereby irrigation water is applied below the soil surface. The specific type of irrigation method varies depending on the depth of the water table. When the water table is well below the surface, drip or trickle irrigation emission devices can be buried below the soil surface (usually within the plant root zone).

Subsurface irrigation